Skip to Content

Industrial LED Displays

Large-format LED for factories, operations rooms, and harsh environments.

Seamless direct view LED displays from 110 to 163 inches, P0.9, P1.25, or P1.56 with touch options, for a single installation or a multi-site rollout. Choose grade-A COB for indoor use, or IP-rated outdoor models for wash-down areas, loading docks, and outdoor sites.

Large-format Volanti LED display showing a production dashboard on a factory floor

Request a project quote  See the range

110" to 163"

One seamless image, with no bezels or seams across the screen.

COB for indoor

A smooth, sealed surface that resists knocks and wipes clean.

IP-rated for outdoor

Encapsulated, IP-rated modules for dust, water and harsh indoor use.

Touch option

Use the display for presentations, training and interactive dashboards.

One unit or fifty

Built for single installations and multi-display projects.

US sales and support

Volanti is based in California and Idaho with a trans-USA installation partner network.

Choose your display - For Wall or Stand

Every model is available in more than one pixel pitch. Tell us how far away people will stand, and we'll recommend the right one.

Size comparison of the 110-inch, 136-inch and 163-inch LED displays on a wall beside a 1.75 m (5 ft 9 in) person: 2440 × 1456 mm, 3040 × 1794 mm and 3640 × 2132 mm overall

110"

For meeting rooms, training areas and production cells. Touch available.

Ask for specifications →

136"

Our most popular industrial size, for production monitoring and plant-floor communication. Touch available.

Ask for specifications →

163"

For control rooms, operations centers and large presentation spaces. 

Ask for specifications →

Harsh-environment & Outdoor

IP-rated LED for loading docks, yards, wash-down areas and outdoor signage. Sizes to suit the site. 

Ask about outdoor models →

Mobile 136" display

The mobile version folds into its own wheeled case. Roll it to where it is needed, open it out to a full 136-inch screen, and fold it away again afterwards. The base has locking casters, access doors at the rear and a built-in connection panel.

Three surfaces, built for different places

What makes these displays tougher than ordinary LED screens is the surface. On a conventional panel, each LED is a separate component standing up from the board. Our displays seal the LEDs in, so there is nothing exposed to knock, snag or collect dirt.

Comparison of three LED display types: standard SMD LED for indoor screens mounted out of reach; COB with a flat, clear surface that is smooth to touch, for touchscreens, factory floors and busy public spaces; and XGOB with a flat, sealed surface for outdoor signs in sun, rain and dust

Grade-A COB (indoor)

COB, or chip-on-board, mounts the LEDs directly on the board and seals them under a flat protective layer. There are no exposed LEDs to knock off, the surface can be wiped clean, and the image stays smooth even close up. It suits production floors, control rooms and training spaces where people walk past and stand near the screen. The smooth surface also suits our touch models, which use an infrared touch frame, so people can touch the screen directly.

IP-rated outdoor, XGOB

Our outdoor models seal each module under an encapsulated, IP-rated coating, so they keep working in dust, rain, humidity and wash-down. Higher brightness keeps the picture readable in daylight. Use them outdoors, or indoors where an ordinary display would not survive.

Put to work

  • Production monitoring. Show line status, output against target, safety notices and quality alerts where the whole team can see them, on a display large enough to read from across the floor.
  • Control and operations rooms. One seamless wall-sized image for dashboards, camera feeds and maps, with no bezels breaking up the picture. Built to run all day, every day.
  • Presentations and training. With touch, the same display becomes a briefing wall for shift handovers, safety training and customer visits.
  • Outdoor and harsh sites. Loading docks, yards, wash-down areas and building exteriors, using the IP-rated models.

Equipment, or a complete installed system

Buy the displays as equipment for your own team or integrator to install, or ask us for a complete system including mounting, controllers, and commissioning. 

Request a project quote

Tell us what you need and we'll come back with a configuration and quotation. For large projects, attach your specification or RFQ instead of filling in every field. Or call 408.500.3500.